INPUT
- Type: Opto-isolated input (for current sink output, negative logic)
- No. of channels: 32 (all can be used for interrupts, one common power supply
per 16 channels)
- Resistance: 4.7K¥Ø
- ON current: 2.0mA min.
- OFF current: 0.16mA max.
- Interrupts:
- 32 interrupt signals combined to one interrupt request
signal as the INTA
- Interrupt generated at the rising edge (HIGH-to-LOW
transition) or falling edge (LOW-to-HIGH transition).
- Response time: 200¥ìsec max.
INTERRUPT
ENERAL
- I/O address: Any 32-byte boundary
- Isolated voltage: 1000Vrms
- Boards in one system: 16 max. including the master board
- External power: 12~24VDC(±10%) (Note: 4mA/12V~8mA/24V per input channel)
- Power consumption: 5VDC 200mA max.
- Connecting distance: 50m approx. (depending on wiring environment)
- PCI bus specification: 32-bit, 33MHz, 5V/3.3V
- Operating condition: 0~50°C, 10~90%RH (no condensation)
- Dimensions: 4.8" x 4.2" (121.69mm x 105.68mm)
- Weight: 130g
|
Software
ACX-PAC(W32)BP
,ACX-PAC(W32)AP
Accessories (option)
Solderless relay terminal
unit : EPD-37 *1
Terminal unit for solderless terminal (M3)
: DTP-3(PC)
Lead terminal unit :
DTP-4(PC)
Signal monitor accessories for digital I/O: CM-32(PC)E *1
Cables
PCA37P,PCB37P,PCA37PS
|
Digital
in/out Board PI-32L(PCI)Hh.jpg)
