PIN Assignment & Etc

• No. of channels: 16
  
• Type: Opto-isolated current-source type inputs (negative logic), 16 channels share a positive common
  
• Input resistor: 3K Ohms
  
• Interrupt: Combine 4 interrupt signal lines to one interrupt request signal as INTA
  
• Rising edge or falling edge input signal can be generate an interrupt

Cable (option)
PCB37P-* (1.5m, 3m, 5m)
PCB37PS-*P (0.5m, 1.5m, 3m, 5m)
PCA37P-* (1.5m, 3m, 5m)
PCA37PS-*P (0.5m, 1.5m, 3m, 5m)

• No. of channels: 16
  
• Type: Opto-isolated current-sink outputs (negative logic), 16 channels share a positive common and a negative common
  
• Output rating: +35 VDC, 100 mA max. per channel, 2A max. per common

• A maximum of 16 input and maximum of 16 output can be performed on board.
• With common composition of  16ch unit, it can respond to different external power supply.
• Since it is electrically insulated by Opto-isolated, PCI bus side and I/O signal interface part are excellent in noise-proof nature.
• 4ch in input signals can be used as interruption input.
  Moreover, the edge of the incoming signal which generates interruption can also be chosen.
• It has the digital filter function in which the noise and chattering of input signal can be prevented.
• Rating of output signal is maximum DC35V and 100mA per point.  

• Board no. switch: 00h to 0Fh
  
• Throughput rate: 1 ms max.
  
• External power: +12 - 24 VDC
  
• Isolation voltage: 1000 Vrms
  
• Power consumption: +5 VDC 250 mA max.
  
• Connector: 37-pin female D-type
  
• Dimensions: 7.1" x 4.2" (179mm x 107mm)