• 32 Channel Opto-Isolated Board
• 16 current-sink inputs
• 16 current-source outputs

PIN Assignment & Etc

• No. of channels: 16
  
• Type: Opto-isolated current-sink(negative logic), 16 channels share one common
  
• Input resistance: 3K Ohms (24VDC, 8mA / channel)
  
• Interrupts: Two interrupt lines use two IRQs, IRQ 3-7, 9-12, 14 and 15, falling edge signal
  
  

• No. of channels:16
  
• Type: Opto-isolated open collector current-source (reverse logic), 16 channels share one common
  
• Output rating: +35 VDC, 150 mA max. per channel, 2A max. per same common
  
  

• Throughput rate: 1 msec max.
  
• External power: +12 - 24 VDC (±15%)
  
• I/O address: Any 2-byte boundary
  
• Power consumption: +5 VDC 350 mA max.
  
• Operating Temperature: 0 to 50° C
  
• Relative Humidity: 20 to 90% (No condensation)
  
• Connector: 37-pin female D-type
  
• Dimensions: 6.3" x 4.8" (160mm x 122mm)

• API-PAC(W32)
  
• ACX-PAC(W32)BP Ver.2.0.
  
• DDE-SERVER(W32)
  
• VI-DAQ for LabVIEW
  
• SUPPORT PAC(PC)601
  
  

• DTP-3(PC)
  
• DTP-4(PC)
  
• EPD-37
  
• CM-32(PC)E

• 32 opto-isolated inputs and outputs
  
• Signal level: +12 - 24 VDC
  
• High source current: 150 mA max. per channel, 2A max. per group
  
• 2 interrupt lines
  
• Reverse current protection for all inputs