• 64 channel (32 input / 32 output) opto-isolated with on-board 12V power supply

• Up to 35VDC, 100mA per signal (max output)

PIN Assignment & Etc

• No. of channels: 32
  
• Type: Opto-isolated current-source (negative logic), 16 channels share one common
  
• Input resistor: 3K Ohms
  
• Interrupt: Up to four inputs can be used as interrupts accessing one interrupt request signal as INTA
  Interrupt generation: Either rising edge or falling edge of input signal, handshake signal

• No. of channels: 32
  
• Type: Opto-isolated current-sink (negative logic), 16 channels share a positive common and a negative common
  
• Output rating: +35VDC, 100mA max. per channel

• Throughput rate: 1ms max.
  
• I/O address: any 32 byte boundary
  
• External power: +12-24VDC (±15%)
  
• On board power supply: +12VDC 240mA max. (±5%)
  
• Power consumption:
  External source: +5VDC 300mA max.
  On board source:+5VDC 1300mA max
  
• Operating Temperature: 0 to 50° C
  
• Relative Humidity: 20 to 90% (no condensation)
  
• Connector: 96-half pitch
  
• Dimensions: 6.9" x 4.2" (176mm x 107mm

Cable (option)
PCB96PS-* (1.5m, 3m, 5m)
PCB96P-* (1.5m, 3m, 5m)
PCA96PS-* (1.5m, 3m, 5m)
PCA96P-* (1.5m, 3m, 5m)
PCB96WS-* (1.5m, 3m, 5m)
PCB96W-* (1.5m, 3m, 5m)

• A maximum of 32 input and maximum of 32 output can be performed on board.
• With common composition of  16ch unit, it can respond to different external power supply.
• Since it is electrically insulated by Opto-isolated, PCI bus side and I/O signal interface part are excellent in noise-proof nature.
• 4ch in input signal can be used as interruption input.
  Moreover, the edge of the incoming signal which generates interruption can also be chosen.
• It has the digital filter function in which the noise and chattering of input signal can be prevented.
• Rating of output signal is maximum DC35V and 100mA per point.
• Power supply for Opto-Isolated drive is built in. It can choose whether this internal power supply is used or external power supply is used.