purple02_next.gifDigital in/out Board PIO-32/32F(PCI)

PIO-32-32F(PCI)

IHigh Speed Isolated Digital I/O Board for PCI

PIN Assignment & Etc

Input Channels

 32

Output channels

 32

I/O Circuit

 

           Signal level

 12-24VDC

           Internal power

 -

Input specifications

 

           Type

 Opto-isolated(for high sink current output)

            Interrupts

 4 input signals combine to one
interrupt request signal as INTA

           Resistance

2.2§Ú

Output specifications

 

           Type

Opto-lsolated Open Collector

           Rating

 35VDC 100mA

Response time

 5µsec (Max.)

Wiring distance

 50m (max)

I/O address

 Any 32-byte boundary

Power consumption

 +5VDC 100mA(max)

PCI bus/
Dimensions(mm)

 32bit,33MHz,5V or 3.3V/
 176.41(L)*106.68(h)

 Connector

 PCR-E96LMD[HONDA Tsushin Kogyo] or Equivalent

 Software
 API-PAC(W32), ACX-PAC(W32)BP ACX-PAC(W32)AP
IO-LIB(LNX)

Accessories (option)
Relay terminal stand terminal unit: EPD-96 *1
Terminal unit for leads: DTP-64(PC) *1
Signal monitor accessories for digital I/O : CM-64(PC)E *1
Relay terminal stand terminal unit: EPD-37 *2
Signal monitor accessories for digital I/O : CM-32(PC)E *2
96pin half -> 37pin D-SUB(female) x2 conversion terminal: CCB-96 *3

Cable (option)
PCB96PS-* (1.5m, 3m, 5m)
PCB96P-* (1.5m, 3m, 5m)
PCA96PS-* (1.5m, 3m, 5m)
PCA96P-* (1.5m, 3m, 5m)
:PCB96WS-* (1.5m, 3m, 5m)
PCB96W-* (1.5m, 3m, 5m)

  • A maximum of 32 input and maximum of 32 output can be performed on board.
  • With common composition of  16ch unit, it can respond to different external power supply.
  • Since it is electrically insulated by Opto-isolated, PCI bus side and I/O signal interface part are excellent in noise-proof nature.
  • High-speed Opto is used and response time has become less than 5µsec.
  • 32 digital signal can be inputted.
  • 32 digital signal can be outputted.
  • 4ch of 32ch input signals can be used as interruption input.
    Moreover, the edge of the incoming signal which generates interruption can also be chosen.
  • It has the digital filter function in which the noise and chattering of input signal can be prevented.
  • Rating of output signal is maximum DC35V and 50mA per point.