|
|
|
Digital Inputs
- No. of channels: 32
- Type: Opto-isolated current-source type inputs (negative logic), 16 channels
share a positive common
- Input resistor: 3K Ohms
- Interrupt: Combine four interrupt signal lines to one interrupt request
signal as INTA
- Rising edge or falling edge of input signal, handshake signal can generate
an interrupt
Digital Outputs
- No. of channels: 32
- Type: Opto-isolated current-sink type outputs (negative logic), 16 channels
share a positive common and a negative common
- Output rating: +35 VDC, 150 mA max. per channel, 2A max. per common
- Interrupt: Handshake signal can generate an
interrupt
eneral
- Board no. switch: 00h to 0Fh
- Throughput rate: 1 ms max.
- External power: +12 - 24 VDC (15%)
- Isolation voltage: 1000 Vrms
- Power consumption: +5 VDC 300 mA max.
- Connector: 96-half pitch
- Dimensions: 6.9" x 4.2" (176mm x 107mm)
|
Software
API-PAC(W32), API-DIO(98/PC)NT, API-DIO(98/PC)W95 |
Accessories
DTP-64(PC), EPD-96, CCB-96, CM-64(PC)E, PCR-E96MD, PCR-E96LMD
|
|
|
- A maximum of 32 input and maximum of 32 output can be performed on board.
- With common composition of 16ch unit, it can respond to different external
power supply.
- Since it is electrically insulated by Opto-isolated, PCI bus side and I/O
signal interface part are excellent in noise-proof nature.
- 4ch in input signal can be used as interruption input.
Moreover, the
edge of the incoming signal which generates interruption can also be chosen.
- It has the digital filter function in which the noise and chattering of
input signal can be prevented.
- Rating of output signal is maximum DC35V and 100mA per point.
|
Digital
in/out Board PIO-32/32L(PCI).jpg)