purple02_next.gifDigital in/out Board PO-64L(PCI)

PO-64L(PCI)
64 Channel Opto-Isolated Digital Output Board
High Sink Current 150mA max per channel 2A max per common

PIN Assignment & Etc

Digital Outputs
  • No. of channels: 64
  • Type: Opto-isolated current-sink type outputs (negative logic), 16 channels share a positive common and a negative common
  • Output rating: +35 VDC, 150 mA max. per channel, 2A max. per common
  • Interrupt: Handshake signal can generate an interrupt
     
General
  • Board no. switch: 00h to 0Fh
  • Throughput rate: 1 ms max.
  • External power: +12 - 24 VDC (15%)
  • Isolation voltage: 1000 Vrms
  • Power consumption: +5 VDC - 300mA max.
  • Connector: 96-half pitch
  • Dimensions: 6.9" x 4.2" (176mm x 107mm)
 Software
ACX-PAC(W32)BP
ACX-PAC(W32)AP

Accessories
DTP-64(PC), EPD-96, CCB-96, CM-64(PC)E, PCR-E96MD, PCR-E96LMD

Cable (option)
PCB96PS-* (1.5m, 3m, 5m)
PCB96P-* (1.5m, 3m, 5m)
PCA96PS-* (1.5m, 3m, 5m)
PCA96P-* (1.5m, 3m, 5m)
PCB96WS-* (1.5m, 3m, 5m)
PCB96W-* (1.5m, 3m, 5m)

  • A maximum of 64 output can be performed on board.
  • With common composition of  16ch unit, it can respond to different external power supply.
  • Since it is electrically insulated by Opto-isolated, PCI bus side and I/O signal interface part are excellent in noise-proof nature.
  • Rating of output signal is maximum DC35V and 100mA per point