purple02_next.gifDigital in/out Board PIO-16/16B(PCI)H

PIO-16/16B(PCI)H

Isolated Digital I/O Board for PCI (Internal power supply)


PIN Assignment   & etc             

Input Channels

 16

Output channels

 16

I/O Circuit

 

           Signal level

 12-24VDC

           Internal power

 12VDC 240mA

Input specifications

 

           Type

 Opto-isolated(for high sink current output)

            Interrupts

 16input signals combine to one
interrupt request signal as INTA

           Resistance

 4.7§Ú

Output specifications

 

           Type

Opto-lsolated Open Collector

           Rating

 35VDC 100mA

Response time

 200µsec (Max.)

Wiring distance

 50m (max)

I/O address

 Any 32-byte boundary

Power consumption

  +5VDC 100mA-max(Extemal),+5VDC 600mA-max(On-board)

PCI bus/
Dimensions(mm)

 32bit,33MHz,5V or 3.3V/
 176.41(L)*105.68(h)

 Connector

 37-pin female D-type
 DCL-J37SAF-20L9[JAE] or equivalent

 Software
ACX-PAC(W32)BP
ACX-PAC(W32)AP

Accessories
DTP-3(PC),CM-32(PC)E,
DTP-4(PC),EPD-37A,EPD-37

Cable (option)
PCA37PS, PCB37PS, PCA37P,
PCB37P

  • Because of the common composition of a 16-point unit, each common line can respond to a different external power supply. Since the PCI bus (personal computer) and the input/output interface are isolated by the photo-coupler, it excels in noise-proof nature.
  • All the input signals can be used as an interruption input. Moreover, the edge of the input signal can also generates interruption.
  • It has the digital filter function for preventing the incorrect input by the noise or the chatering.
  • The rating of an output signal is maximum DC35V and 100mA per point.
  • The Zener diode is connected to an output transistor for protection from serge voltage. Moreover, the over-current protection element is attached per eight output transistors.
  • The power supply for a photo-coupler drive is built in. It can choose whether this built-in power supply is used or an external power supply is used.