Isolated Digital I/O Board for PCI

              
PIN Assignment & Etc          

Accessories (option)
Solderless relay terminal unit: EPD-37  *1
Terminal unit for solderless terminal (M3)              : DTP-3(PC)
Lead terminal unit  : DTP-4(PC)
Signal monitor accessories for digital I/O: CM-32(PC)E  *1
*1 Option cable PCB37P or PCB37PS is required separately

Cable (option)
PCB37P-*  (1.5m, 3m, 5m)
PCB37PS-*P (0.5m, 1.5m, 3m, 5m)
PCA37P-*  (1.5m, 3m, 5m)
PCA37PS-*P (0.5m, 1.5m, 3m, 5m)

• In order for 16-point unit to carry out common composition, it can common every respond to a different external power supply.
• Since the PCI bus (personal computer) and the I/O interface are insulated by the photo-coupler, it excels in noise-proof nature.
• All the input signals can be used as an interruption input.
  Moreover, the edge of the input signal which generates interruption can also be chosen.
• It has the digital filter function for preventing the incorrect input by the noise or the chattering.
• The rating of an output signal is a maximum of 35VDC and 100mA per point.
• Zener diode is connected to the output transistor for protection from serge voltage. Moreover, the over-current protection element is attached per eight output transistors.
• PIO-16/16L(PCI)H, and PIO-16/16L(PCI) are connector pin compatibles.