Bi-directional TTL-Level Digital I/O Board for PCI

PIN Assignment & Etc

Cable (option)
PCB96PS-0.5/1.5, PCA96PS-0.5/1.5
PCB96P-1.5
PCA96P-1.5

• By bus master transmission, data transmission between personal computer-boards can be performed at the speed of 80MB/S (a maximum of 133MB/S), without applying load to CPU.
• At sampling rate 20MHz speed, strike REJI of digital signal is carried out, and pattern detection can be carried out. (Pattern Input)
• It can be used as a 20MHz digital pattern generator.(Pattern Output)
• The on-board FIFO memory is carrying out 1K-Word loading as object for input / output, respectively.
• Since 32bits I/O terminal is set up by software per 16bits, it can be used by setup of either input 32ch, I/O 16ch each and output 32ch.
• There is a control signal which can control start and stop about the pattern I/O other than digital I/O terminal. Moreover, in order to carry out high-speed access to peripheral equipment, REQ-ACK signal for handshakes is also supported.
• Synchronous control connector which can realize easily synchronous operation between the said model and different model board is carried.
• Not only pattern I/O operation that uses bus master transmission but use as a general-purpose digital I/O board can be performed. In general-purpose input mode, it interrupts and 4 points of input terminal can be used as signal (standup signal).
• In order to perform setup of interruption by software, setup by hardware is unnecessary.
• The timer which can be used with application is carried, and even if used in the Windows environment, exact time surveillance is made.