purple02_next.gifDigital in/out Board(PIO-48D(CB)H)

PIO-48D(CB)H

Bi-directional Digital I/O Card for CardBus

PIN Assignment & Etc

Bus  :  CardBus
Function  :  Bi-directions
Input point  :  -
Output point  :  -
Bidirectional point  :  48
Response speed  :  200nsec (Max.)
Voltage of Operation (operation circuit voltage)  :  Input : 3.3VDC-LVTTL
Voltage of Operation (operation circuit voltage)  :  Output : 3.3VDC-LVTTL
Built-in power supply  :  -
Input circuit  :  LVTTL level input (Positive logic)
Output circuit  :  LVTTL level output (Positive logic)

 

  • This board can be used to input/output 48 points bi-directional digital corresponding to the i8255 mode 0. Uninsulated LVTTL-level input/output enabling fast response.
  • Functionally equivalent to the PIO-48D(PCI) PCI bus board.
  • "The connector signal assignments when the DIO-68M/96F cable is used are the same as the cable connector signal assignments for the PCB96P-** series and the PCB96PS-**P series option cable on the PIO-48D(PCI). "
  • You can use all of the input signals as interrupt inputs. You can also select the interrupt trigger edge of the input signal.
  • A digital filter function is included to prevent problems due to noise or chattering on input signals.
  • * : If your PC has a stack of two TYPE II PC Card slots, two PC Cards cannot be used simultaneously in both slots. It can be used along with another PC Card which does not use any external connector, such as a memory card