purple02_next.gifDigital in/out Board PO-32B(PCI)H

PO-32B(PCI)H

interface board of the PCI bus conformity which outputs a digital signal.
The driver (API-PAC(W32)) for Windows and Linux appending.
PIN Assignment & Etc         

 

Input Channels

 -

Output channels

 32

I/O Circuit

 

           Signal level

 12-24VDC

           Internal power

 12VCD 240mA

Input specifications

 

           Type

 -

            Interrupts

 -

           Resistance

 -

Output specifications

 

           Type

Opto-lsolated Open Collector

           Rating

 35VDC 100mA

Response time

 200µsec (Max.)

Wiring distance

 50m (max)

I/O address

 Any 32-byte boundary

Power consumption

 +5VDC 300mA-max(Extemal),+5VDC 1200mA-max(On-board)

PCI bus/
Dimensions(mm)

 32bit,33MHz,5V or 3.3V/
 176.41(L)*105.68(h)

 Connector

 37-pin female D-type
 Dcl-J37SAF-20L9[JAE] or equivalent

 

 Software
ACX-PAC(W32)BP
ACX-PAC(W32)AP

Accessories
DTP-3(PC), DTP-4(PC),EPD-37A,EPD-37, CM-32(PC)E

Cable (option)
PCB37PS-* (1.5m, 3m, 5m)
PCB37P-* (1.5m, 3m, 5m)
PCA37PS-* (1.5m, 3m, 5m)
PCA37P-* (1.5m, 3m, 5m)

  • Because of the common composition of a 16-point unit, each common line can respond to a different external power supply.
  • Since the PCI bus (personal computer) and the input/output interface are isolated by the photo-coupler, it excels in noise-proof nature.
  • The rating of an output signal is maximum DC35V and 100mA per point.
  • The Zener diode is connected to an output transistor for protection from serge voltage. Moreover, the over-current protection element is attached per eight output transistors.
  • The power supply for a photo-coupler drive is built in. It can choose whether this built-in power supply is used or an external power supply is used.